Factory Wholesale High Tensile 65mn Woven Crimped Wire Mining Vibrating Screen Mesh with Hooked for Coal Mine Industry
Mining screen, also known as vibrating screen mesh, quarry screen and crusher screen, is one of the most important and versatile parts of screening machines in mining industry, which separates a mix of particles into two or more groups depending on size and is widely used in a variety of sizing, grading, scalping, dewatering, wet screening and washing applications.
Pre-crimped wire mesh is made of wire diameters ranging from 1.5mm to 6 mm. It can be used for windows, partitions, roasting of meat and flour sieving or mine screens.
In the pre-crimping process, the wire is first formed (crimped) in precision machines using rotary dies that precisely define the spacing of the wires. This insures that the wires are locked firmly together at the intersections. The pre-crimped wires are then assembled in custom designed screen assembly machines (looms).
When the open area is important, extra crimps between the intersections provide a more rigid weave and provide locking and tightness for light wires in relation to the large openings.
Due to the crimping process, the mesh have very accurate and consistent openings and are woven after crimping. It is typically preferred for vibrating screens and many other applications where sizing is critical.
| Material | Wire Gauge | Hole Size |
| Stainless (SUS 304#) | 1.2m/m~12m/m | 10mm - 100mm |
| Hot dip galvanized | 1.2m/m~12m/m |
| Galvanized | 1.2m/m~12m/m |
| Customization Was Available |
1. Double Crimp Woven Wire
Used for medium to heavy wire in relation to screen opening size.
2. Lock pre-crimp mesh
Unlike plain crimped mesh, lock crimped mesh is characterized by straight sections of wire connected by a well defined bump at the wire intersections, such a manner to actually lock the wires together, offering further assurance of no wire movement. Our lock crimp wire mesh is good in quality and competitive at price.
3. Flat Top Woven Wire
Flat top is similar to the lock crimp, but all of its crimping is offset to one side of the material. This creates a smooth top surface-with no high points-as all wires are woven on a single plane. Its bottom side, however, has crimp bumps approximately twice the height of lock crimp bumps. Flat top was originally created to allow for the smooth flow of materials over the surface and provide a flat face for use as backer screens. Flat top is ideal for aggregate sizing and sorting, agriculture, filtration, and heat-treating applications.
4. Intermdiate Crimp Woven Wire
Used in coarse weaves of lighter gauge woven wire to provide greater stability, tightness of weave and maximum rigidity. Very common in wire mesh openings larger than 1/2" (12.7mm).
Products Common Specifications: | Name | Heavy duty wire Crimped Wire Mesh.Mine Mesh. Vibratingscreen mesh |
| material | 65Mn,45#,50#,55#,60#,70#,72A, 304, 316, 316L |
| wire | 0.8mm-12.7mm |
| Opening | 2mm to 100mm |
1. Angle: 30 degrees, 45 degrees,60 degrees
2. Crimped Wire Mesh Shape: v-shaped, u-shaped
3. Hook Type: C or U hook for 30°-180°
4. Weaving Type: Double crimped, intermediate crimped, flat top crimped, lock crimped.
5. Mesh Type: Square, rectangular slot, long slot.
6. Surface Treatment: Anti rust oil painted.
7. Edge Preparation: Plain, bent, reinforced shroud, welded shroud, bolt shroud. 
Applications
- Mining industry
- Coal factory
- Construction industry
- Food processing and meat industry
Used for - Grid window
- Poultry protection
- Concrete reinforcement
- Building construction
Packing
Packing: In rolls, wrapped with waterproof paper then covered with hessian-cloth. Special packing may be arranged if necessary.
